monome enclosure "kisslick" design

A low-cost 40h monome enclosure

Assembled:


Layout:


Exploded:


Parts:


Corner assembly:


Assembly steps:


Parts & tools needed list:

• The laser cut parts pictured above
  
• 6mm M3 metric bolts - 21 bolts
• 30mm M3 metric bolts - 8 bolts
• super glue or acrylic glue
• rubber feet
• screwdriver

Options:

• The four pieces of material that are laser cut can be any combination of colors from http://www.ponoko.com/make-and-sell/materials#9, however:
• faceplate must be at most 4.5mm/0.18" thick but can be thinner; note: thinner faceplate means keys will stick out more
  
• lower faceplate must be 3mm/0.12" thick
• walls must be 6mm/0.24" thick
• bottom plate can be anything but the 6mm bolts will work best with a 3mm thickness, you can buy different length bolts for different thickness materials
• Can engrave designs on faceplate and walls.